Skip to main navigation Skip to search Skip to main content

Single-phase CZTS thin film prepared by high power impulse magnetron sputtering (HiPIMS): A first attempt

  • Siti Noryasmin Jaffar
  • , Nafarizal Nayan
  • , Zulkifli Azman
  • , Amaliyana Raship
  • , Mohd Khairul Ahmad
  • , Soon Ching Fhong
  • , Saidur Rahman
  • , Mohd Yazid Ahmad
  • , Koichi Sasaki
  • Universiti Tun Hussein Onn Malaysia
  • Sunway University
  • Nanorian Technologies Sdn Bhd
  • Hokkaido University

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

Copper-zinc-tin-sulfide: Cu2ZnSnS4 (CZTS) is a non-toxic and abundant materials that could possibly replace the toxic and rare copper-indium-gallium-selenium (CIGS) materials for the absorber of thin film photovoltaic. However, to-date, the CZTS thin film fabrication process is not yet ready for commercialization due to its complexity of quaternary elements. Here, CZTS thin films were deposited for the first time using high power impulse magnetron sputtering (HiPIMS) technique. Although the fabrication of thin film solar cell using conventional DC and RF sputtering is very common, to date, there is no report on the fabrication CZTS thin film using HiPIMS technique. The aim of using HiPIMS system is to resolve the problem on stoichiometry control in single step magnetron deposition, i.e., less composition of zinc and sulphur. The prepared thin films were then characterized using X-ray diffraction (XRD) and atomic force microscopy (AFM). The thickness of each film was measured using a step profiler and verified with a cross-sectional image obtained by FE-SEM. The XRD pattern showed significant different between film prepared by HiPIMS and conventional RF sputtering on single CZTS (112) peaks. The CZTS crystallite size was in the range of 14-28 nm, rely on the discharge power and deposition time. In average, the root mean square roughness was lower than 2 nm, which is useful for solar cell application. The chemical composition analyzed by EDX showed that the atomic ratio of sulfur/metal < 1, indicating that the thin film prepared by HiPIMS deviated from CZTS stoichiometric.

Original languageEnglish
Pages (from-to)195-208
Number of pages14
JournalInternational Journal of Nanoelectronics and Materials
Volume14
Issue number2
Publication statusPublished - Apr 2021
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • CZTS thin film
  • HiPIMS
  • Magnetron sputtering
  • Single-phase crystallization

Fingerprint

Dive into the research topics of 'Single-phase CZTS thin film prepared by high power impulse magnetron sputtering (HiPIMS): A first attempt'. Together they form a unique fingerprint.

Cite this