Abstract
Nanofluids are the suspension of ultrafine solid nanoparticles in a base fluid. Nanofluids are expected to be a promising coolant candidate for thermal management system of next generation high heat dissipation electronic systems. Nanofluids are used with different volume fractions. A minichannel heat sink with a 20 × 20 cm bottom is analyzed for SiC-water nanofluid and TiO 2-water nanofluid turbulent flow as coolants through hydraulic diameters. The results showed that enhancement in thermal conductivity by dispersed SiC in water at 4% volume fraction was 12.44% and by dispersed TiO2 in water was 9.99% for the same volume fraction. It was found that by using SiC-water nanofluid as a coolant instead of water, an improvement of approximately 7.25%-12.43% could be achieved and by using TiO 2-water 7.63%-12.77%. The maximum pumping power by using SiC-water nanofluid at 2 m/s and 4% vol. was 0.28 W and at 6 m/s and 4% volume equal to 5.39 W. By using TiO2-water nanofluid at 2 m/s and 4% vol. it was found to be 0.29 W and 5.64 W at 6 m/s with the same volume of 4%.
| Original language | English |
|---|---|
| Pages (from-to) | 76-82 |
| Number of pages | 7 |
| Journal | Applied Thermal Engineering |
| Volume | 32 |
| Issue number | 1 |
| DOIs | |
| Publication status | Published - Jan 2012 |
| Externally published | Yes |
Keywords
- Heat flux
- Minichannel heat sink
- Nanofluid
- Pumping power
- Thermal conductivity
Fingerprint
Dive into the research topics of 'Nanofluid as a coolant for electronic devices (cooling of electronic devices)'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver